WeChat
这里是占位文字
High-efficiency compressor
TCC can supply the complete set and spares for oxygen compressor, nitrogen compressor, air compressor, boosters and more series of products. The highest circulation booster pressure can do 6.0 MPa, and oxygen turbine compressor at present can achieve the maximum flow 100000 Nm3 / h, the highest pressure 4.0 MPa.
In addition, for gas products with small flow and high pressure, there have reciprocating compressors, which are suitable for oxygen, nitrogen, argon, hydrogen, natural gas and carbon dioxide, with the highest pressure up to 20MPa.
Learn more
这里是占位文字
High-performance multi-series expansion unit
The expander can support small air separation to 100,000, 120,000 extra-large air separation, has been successfully used in 60,000,80,000,120,000 extra-large air separation equipment. The efficiency and reliability have reached the international first-class level.
Learn more
这里是占位文字
High Efficiency Heat Exchanger
Due to the advanced high-efficiency fins and researches brazing technology, TCC can provide the 12.8mpa high pressure heat exchanger.
Learn more
这里是占位文字
Process Valve & Control Valve
For the separation system, TCC can provide many series of valves.
Learn more
这里是占位文字
Multistage low temperature centrifugal pump
Multistage low temperature centrifugal pump is mainly used in the transport of liquid oxygen, liquid nitrogen, liquid argon, LNG and other low temperature medium. It has multiple pump types, which can meet the requirements of various working conditions of 6-200m3/h flow and 2-15MPa pressure
Learn more
这里是占位文字
Electric arc furnace
Electric arc furnace is an industrial furnace that uses the heat generated by electric arc to smelt ores and metals, and it is also one of the important equipment in iron and steel plants, we provide some spares of the furnace, like 350mm and 400mm diameters ultra high power level graphite electrode
Learn more
这里是占位文字
The medium frequency induction furnace
The medium frequency induction furnace uses rectangular copper tubes to be wound into a spiral induction ring in a single layer, while the crucible with refractory knotted in the water-cooled spiral induction ring is used to contain the heated metal.Medium frequency induction furnace generally consists of 4 parts:power supply, furnace body, capacitor bank and electric control system,we have supplied all the spares
Learn more
这里是占位文字
Gear box
Gearbox is used in many area of steel plant, like sinter and coke oven plant, we have cooperate with NGC group to supply many series of the gearbox, including specialized product
Learn more
这里是占位文字
Withdrawal straightening equipment
The withdrawal straightening of continuous casting billet is the process of pulling and straightening continuous casting slab from the mold of arc continuous casting machine at a certain speed, it is one of the key process to the continuous casting, we supplied the withdrawal machine,fly cutting machine, copper mould, also the reducers and motors of withdrawal equipment
Learn more
这里是占位文字
Electric heating capacitor
Electric heating capacitor is used to improve the power factor of induction heating.RAM air-cooled all film electric heating capacitor is mainly composed of core and shell. The core is composed of array elements in parallel, and two sides of the core are welded with connecting pieces as the two poles of the core; The shell is made of aluminum alloy plate by welding
Learn more
这里是占位文字
Billet induction heating furnace
Billet induction heating is a new type of billet heating. Based on its energy-saving and environmental protection characteristics,coupled with its small investment and small footprint, billet induction heating has become the preferred heating method formany manufacturers.
Learn more
这里是占位文字
Melting electric arc furnace
The steelmaking electric arc furnace uses an electric arc as a heat source.and uses scrap steel(iron) as a raw material to smeltspecial steelmaking equipment such as carbon steel, high-quality carbon steel alloy structural steel tool steel, stainless steeland the like.
Learn more
这里是占位文字
TURBINE
The work produced by a turbine can be used for generating electrical power when combined with a generator. Moving fluid acts on the blades so that they move and impart rotational energy to the rotor.
We provide turbine spares and other spares in turbine system, such as stop valve, governing valve, valve actuator, EH oil system, turning gear, jacking oil system and so on.
Learn more
这里是占位文字
BOILER FEED WATER PUMP
Boiler feed water pump is a specific type of pump used to pump feedwater into a steam boiler. The water may be freshly supplied or returning condensate produced as a result of the condensation of the steam produced by the boiler.
Complete set of boiler feed water pump for power plant mainly contains booster pump, feed water pump, Hydraulic coupling and its supporting products and is widely used in sub-critical, super-critical and ultra super-critical thermal power generating unit from 50 to 1000MW.
Learn more
这里是占位文字
BLOWER SPARES
There are various types of blowers in power plant, such as ID Fan, FD Fan, PA Fan, SA Fan, Roots blower, etc. These blowers play an important role in power plant.
Learn more
这里是占位文字
BOILER PIPE
Boiler pipes are always used in high temperature and high pressure conditions. Under the action of high temperature flue gas and water vapor, the pipe will oxidize and corrode. Therefore, the tube is required to have high durable strength, high oxidation resistance, and good organizational stability. The tube is mainly used in air pre-heater, superheater, reheater, panel, main steam pipe and so on.
Learn more
这里是占位文字
GGH ELEMENT
Gas gas heater (GGH in short) is a heat exchanger used in power plant to heat treated flue gas (40-50℃) with raw flue gas (130-150℃) in FGD system. GGH plays dual function: flue gas cooling and reheating. Raw flue gas is cooled down by GGH. If hot flue gas enters FGD tower, it would cause damage to anti-corrosion coating inside FGD tower. And a lower temperature is good for the absorption of SO2.
Since it works in harsh environment long time, high corrosion resistance of heat element is requested. Manufacturers usually adopt decarburized steel and wet static electricity method for double enameling to solve this problem.
Learn more
这里是占位文字
COAL MILL SPARES
Coal Mills are used to pulverize and dry to coal before it is blown into the power plant furnace.
In order to control the energy production of the plant, the coal flow into the furnace is a very important factor. Unfortunately, it is not possible to measure the coal flow from the coal mill to the furnace. The coal flow out of the mill is often estimated based on the incoming coal flow. In case of a fault in the coal mill the plant operator would need to take accommodating actions as fast as possible. Fault detection in the coal mill is consequently important.
Learn more
这里是占位文字
SLAG & ASH TREATMENT SPARES
Coal bottom ash and boiler slag are the coarse, granular, incombustible by-products that are collected from the bottom of furnaces that burn coal for the generation of steam, the production of electric power, or both.
In order to save energy and dispose of the slag & ash environmentally, power plants usually use a variety of products: submerged scraper conveyor, chain and flight conveyor, slag cooler, hydraulic shut-off gate, bucket elevator, Chain bucket conveyor and so on.
Learn more
CONTAT US
Address：B1603, China Central Place,339 Zhongyang Road, Nanjing, China
Copyright © 2020 TCC All Rights Reserved
Powered by：www.300.cn nanjing.300.cn Business license
APPLICATION AREA
